Skip to main content

Color modes


Color modes :

In Photoshop we have different color modes like RGB, CMYK, Gray scale, Bitmap, lab ect. To set color mode, Go to image menu on menu bar than select mode option than select required mode.

RGB:

RGB color mode is most versatile and widely used color mode for Photoshop. 
It is the color mode that which digital cameras save your photos.

R-RED
G-GREEN
B-BLUE

The combinations of Red, Green, Blue will give different colors. 
This mode is choice for export to the web, mobile devices, inkjet printers  etc…

CMYK:

In CMYK color mode each pixels is assigned a percentage value for each of the processors inks. 
Pure white is generated when all four component  values 0%. 
For black color all percentages will be zero like cyan, magenta, yellow and black only contain 100%. 
CMYK is also a standard color mode which represent exact range of color   

GRAY SCALE:

Gray scale color mode is not  represent as neither black nor white. 
Gray scale color mode provide 254 shades and pure white &  pure black colors. 
We will able to convert into gray scale from any color mode, but not convert gray scale to any color mode.
When you convert color picture into gray scale and saved the information about color on the particular pixel will be  delete permanently.

BIT MAP COLOR MODE:

In bit map color mode all the pixels are individually are in 100%white.  
Bitmap color mode not entertain layers, filters or color adjustments.

INDEX COLOR MODE:

A file in index color mode contain just one channel.
It contains 256 color shades. Each pixel numbered from 0-255, to represent  a color. 
Most probably in GIF we will observe this color mode.

LAB:

A Lab color space is a color-opponent space with dimensions L for lightness and a and b for the color-opponent dimensions, based on non linearly compressed (e.g. CIE XYZ) coordinates. 
The terminology originates from the three dimensions of the Hunter 1948 color space, which are L, a, and b.



Comments

  1. UnknownJuly 19, 2019 at 7:26 AM

    Though the technical glitch scared a lot of people. It was just a publicity stunt to make the event even more interesting. The intention was good the question is. Is it necessary to make a fuss just before the big event? I don't think so.jogos friv gratis 2019
    Jogos 2019
    jogos friv
    abcya free games only

    ReplyDelete

Post a Comment

Popular posts from this blog

Characteristics of computers

    Characteristics:        All computers have similar characteristics, which tells how computers are efficient to perform task. Computers have some Limitations also. Speed:     Computer can work very fast. It takes only few seconds for calculations on very large amount of data. Computer can perform millions (1,000,000) of instructions per second.      We measure the speed of computer in terms of microsecond (10-6 part of a second) or nanosecond (10 to the power -9 part of a second).   Accuracy:        The degree of accuracy of computer is very high and every calculation is performed with the same accuracy.  The errors in computer are due to human and inaccurate data.       The calculation done by computer are 100% error free, If we provide accurate input. Diligence:        A computer is free from tiredness, lack of concentration...
18 comments
Read more

DS LAB FOR II YEAR

1.SINGLE LINKED LIST Procedure for creation of single linked list: STEP-1 : Declaring a variable named as “item”.Ie the element what we place in the linkedlist of the new node.         STEP-2 : Read the value   in “item”. Set first=last=null and next=null. STEP-3: Create a new node named as temp and assign the variable item to data part andassign Address of the node temp to null.       temp.data=item;       temp.next=null; STEP-4: Check   the address part of the first node Check if first=null Then assign first=last=temp Other wise Then assign the new node tolast.next=temp          last=temp STEP-6 : Repeat STEP-3 until you read required nodes. Procedure for display the linked list: STEP-1 : Check whether the list having nodes or not i.e Check if first=null        ...
26 comments
Read more

LEVELS AND CURVES

LEVELS:                 Levels are used to set the shadows, mid tone etc.  O pen an image on Photoshop window. Select image menu on menu bar than adjustments than levels. A dialogue box will appear on screen which shows three pointers which indicates three optimum. The black triangle indicates shadows and gray triangle indicates mid tone and white triangle indicates highlights. In the channel menu different options are provided in drop down list. Make sure select on preview, which gives current adjustments on your picture. CURVES: Curves are to  similar to levels, it gives more power to control shadows highlights and mid tones. One of the simplest adjustment we can make with curves is increasing the contrast. Go to image menu and than adjustments,than curves. Dialogue box will appear on screen with straight diagonal line.      ...
16 comments
Read more